How to connect to the network after win10 9926 is automatically updated to 10041?

After the WIN10 9926 is automatically updated to the 10041 version, I can be dumbfounded. First, I saw a big red cross on the network connection icon, followed by a red cross on the speaker icon. I have the heart to upgrade the 9926 version, but it is not easy to upgrade to the current 10041, and I dare to go farther. So I can only look for the reason from the network hardware settings, because the connection is not on the network, even if you want to seek assistance is empty talk. So how does the win10 9926 automatically update to the 10041 version after connecting to the network? The following small series will introduce you to everyone, let's take a look!

Methods/Steps

First of all, we must first confirm our computer and & ldquo; cat & rdquo;, the connection between the network cable is no problem, then open the network and sharing center, in Change the network settings option to "Set new connection or network" as shown:

Type your network connection information in the icon below and click Connect.

After completing the previous step, if your network connection is up, then everything will be fine, but in most cases it is difficult to connect to the network, although our network connection is generally broadband connection. But there is an ethernet that seems to be useless, but it plays a pivotal role, and the correct setting of it is the key to our broadband connection. Let's talk about the Ethernet settings on the WIN10 10041 version. Open the Network and Sharing Center and find the <quo;Ethernet” icon in the Change Adapter Settings. Figure:

Then right click on the "Ethernet" icon, click on the property in the dialog box, as shown in the figure:

If you click on the property, it will be normal. To pop up the Ethernet Properties dialog box, in the drop-down menu of the Advanced Options in the menu bar, click on “Speed ​​& Duplex", and then select “10Mbps Full Duplex" in the value box on the right. Then confirm. As shown in the figure:

Another situation is that when we right click on the properties of the Ethernet, a window will pop up, and we don’t panic, since we can’t Set, we come to the source of the Ethernet to set its properties, find Ethernet in the device manager, and then right-click its properties option. As shown:

When you have set all of this, click the OK button and you will see that the red cross on the network connection icon on the launch bar is gone, replaced by a A small yellow exclamation mark, which proves that you can now create your network connection and go on your network!

Notes

Be sure to set to full duplex, the value can't be greater than 10.

The above is the introduction of win10 9926 automatic update to 10041 version how to connect network method, hope to Help everyone!