What if win8 does not search for wifi? Windows8 search can not find wireless network solution diagram

How to search for wireless signals under Win8 system

In general, our devices will automatically detect the wireless signals in the range, but some friends may encounter them when using Win8 system. The problem of not finding the wireless signal, even if the system is restarted, may not help. Some of the next steps may help everyone.

Fault phenomenon: Pre-installed Win8 Chinese version system, wireless device driver is normal, but the search signal is not available. Flight mode is confirmed to be off.

Cause analysis:

The Win8 system has newly added control for the wireless network card, which needs to be enabled to connect to the wireless network. Solution: 1. Open the charms and select “Settings”. You can use the mouse to move to the top right corner of the screen to open the fmodex.dll charm, or you can quickly open it by pressing the keyboard <;Windows logo key" (the button on the keyboard) + “C” key; 2. Click “ More computer settings & rdquo; --& ldquo; wireless & rdquo; menu; 3. Click & ldquo; wireless settings & rdquo; lower slider, turn on the wireless function; 4. After the setup is complete, the network list can be found to search for wireless signals. If the network list displays the following information, check if the wireless management service (WLAN AutoConfig (WlanSvc) service) d3dx9 is started. WLAN AutoConfig service viewing method:

Right-click in the blank space of the taskbar to select “Task Manager”; If it is displayed as the simple information mode as shown below, click “Details”; Click “ Service & rdquo; tab, find the WlanSvc (WLAN AutoConfig) service, check the "Status" column is displayed "already running"; if the display is "already stopped", right click on this service selection “ Start & rdquo;. This method can start this service, but if the service is disabled or manually started, the service lsass.exe will not start automatically after restarting the computer. If you need this service to start automatically, you can click ““Open Service” to enter the service management interface, and refer to the following knowledge base to modify it to start automatically.