Solution for loss or damage of winload.exe after booting the computer

In the use of the computer, it is inevitable that some problems will be encountered. Recently, some users have reported that the winload.exe is missing or the winload.exe is damaged after the computer is turned on. What is going on? In fact, this is caused by a system startup error or a loss of boot files. How do we solve this phenomenon? Under normal circumstances, we can solve this problem by booting and repairing. The following is a brief introduction to the solution to the loss or damage of winload.exe after the computer is turned on.

Method 1: If winload.exe file prompt abnormal, while the hard disk partition display prompts (Subdivision: 3), then you can enter the system; then just press Return (Enter) to confirm After that, you can enter the operating system.

However, it is very troublesome to press the Enter key every time you turn on the system. If you want to solve this problem, you need to turn off the power after turning off the power, and check the following interfaces: hard disk, socket, data connection; You should also check the memory slot, hard disk connection, CD connection and other hardware one by one, and insert and remove the oxidation point.

Method 2: If the hard disk partition prompt is not displayed, it is usually a hardware problem such as a memory stick; if you reinstall the system operation, when you choose to install the system on the C drive, then load winload will appear. Exe error prompt, so you may wish to try to install on a non-C drive (such as: D drive), if it can be explained that there is a problem with the C drive identification (re-plug hardware to solve the problem).

The above is the solution for the loss or damage of winload.exe after the computer is introduced. If you encounter the above situation, you can follow the above steps. After the operation is completed, the above phenomenon will not occur again.