How to achieve fast booting of the computer

Someone will ask if my computer has been booting up slowly. How can I solve this problem? Sometimes we will use some more practical methods, such as installing a 360 system optimization, this time we will feel very good. So, how can we improve the boot speed of this WIN computer? Here is an answer.

Q: Occasionally use the windows me to replace the system with the brand machine, found the first time to use "hibernate" to shut down, the second time press the power button to enter the windows me screen, only 5 seconds, before It takes more than 1 minute for Windows 98 to enter the screen. Does Windows 98 have this function, how is the specific operation? A: You can also quickly switch on and off under windows98. Windows 98 supports this mode. When installing windows98 using the setup/p j parameter to install, you can make windows98 support ACPI and implement STR function. Also note that hardware support is required. Motherboard support is the key. The motherboard needs to support the STR function. Also note that there is a motherboard that claims to support the STR function. Due to design reasons, it is difficult to achieve smoothly. In addition, the chassis power supply is required. When the power supply provides 5V voltage to the motherboard, the power supply must be stable above 720 ma. STR is an abbreviation for suspend to RAM, which is "suspended in memory." It means that after the system is shut down or enters the power saving mode, the file data required for restarting is stored in the memory. After using the STR function, do not continue to insert or remove the memory before completely cutting off the power of the host. Otherwise, the memory may be burnt out or the system may be destroyed.

This is my good way. I hope that you can feel useful, then it is very good.