Win2003 original CD-ROM added SAS Raid driver practical experience

After finishing their own, found that it is very simple, there are a total of the following steps:

1, Create driver file directory 2, compression driver file 3, write txtsetup.sif file 4, write winnt.sif file 5, copy the file to the original CD

Here we begin the actual 1, create driver The file directory is as shown

I put the SAS Raid driver file in the $OEM$\\$1\\drivers\\IntelMegaSR
directory, and the directory of the horizontal line can be defined by myself. , but need to correspond to the contents of the following winnt.sif file 2, the compressed driver file in the cmd command line mode to execute makecab percsas.sys percsas.sy_ 3, write txtsetup.sif file The following is the content to be added, the parameters can be Get the driver file in txtsetup.oem; [SourceDisksFiles] percsas.sys = 1,,,,,,3_,4,1,,,1,4 //[SourceDisksFiles.ia64] [HardwareIdsDatabase] PCI\\VEN_1028&DEV_0015& SUBSYS_1F011028 = "percsas" PCI\\VEN_1028&DEV_0015&SUBSYS_1 F021028 = " percsas " PCI \\ VEN_1028 & DEV_0015 & SUBSYS_1F031028 = " percsas " PCI \\ VEN_1000 & DEV_0060 & SUBSYS_1F0A1028 = " percsas " PCI \\ VEN_1000 & DEV_0060 & SUBSYS_1F0B1028 = " percsas " PCI \\ VEN_1000 & DEV_0060 & SUBSYS_1F0C1028 = " percsas " PCI \\ VEN_1000 & DEV_0060 & SUBSYS_1F0D1028 = " percsas " PCI \\ VEN_1000 & DEV_0060 & SUBSYS_1F111028 = " percsas " [Map.Computer] [SCSI.Load] percsas = percsas.sys, 4 [BootBusExtenders.Load] [SCSI] percsas = " DELL PERC5 and PERC6 /CERC6 RAID Controller Driver (Server 2003 32 bit) " [BootBusExtenders] 4, prepared winnt.sif file [Data] MsDosInitiated = " 0 " UnattendedInstall = " Yes " [ ,null,null,0],Unattended] OemPreinstall="Yes" OemPnPDriversPath=drivers\\IntelMegaSR //To correspond to the folder you built [UserData] ProductID = "RHBX7-YVMY6-2QHM8-CHYHR-JMPPB" //Add your own version of CDKEY [Networking ] [Identification] JoinWorkGroup = workgroup 5, Before copying the file to the disc, I saw that the friend re-burned the file after decompressing the file. In fact, there is no need to use UltraISO to open the ISO file. Copy the modified file and save it. The corresponding location of the file is as follows: Txtsetup.sif --- ----------- I386 Winnt.sif --------------- I386 percsas.sy_ -------------- I386 $ Oem$ ----------------I386 and the root directory of the CD (it seems to copy a location, I did not finalize it) Haha has been successful. The integration SP2 is F:WindowsXP-KB835935-SP2-ENU.exe -s:F:CD, I have not tested, I will have a chance to say it later.