Gene6 FTP can't start solution after cracking on Windows 2008

Gene6 FTP is a very useful FTP server software. The function can be said to be no worse than SERV-U. All servers in the green resource network are all G6 FTP.

Recently, Green Resources has a Windows 2008 Enterprise Server. I also downloaded the green version as usual. As a result, Gene6 Ftp can't use the 2003 method in win 2008. There is no way to download the installed version

v3.10.0.2. Download and install, normalize everything. When registering, there was a problem. After copying registration-key.dat to the installation directory, the G6 service could not be started. The same is true for this N-version version.

Finally, I found a version of 3.7 to replace the main file to get this

-------------------

About windows 2008 The problem of installing Gene6G FTP Server can be installed normally or can be used normally. However, if registration-key.dat is COPY to the installation directory, the service cannot be started. So many versions of Xixi Xiaobian have been tested. The most perfect solution is to replace the Server main file method

Install the program above, add the Chinese file, and then replace the G6FTPServer.exe copy with the file below the installation directory to complete the crack. Work..

---------------

I just found a solution on the official website. I don't need to replace the main program of 3.7.

http://www.g6ftpserver.com/en/registering

You're done!

If you're running Windows 2008 or if service no longer starts after license installation , make sure you add g6ftpserver.exe as exception in control panel /system /advanced /performances /dep.

Using Windows 2008 R2, run DOS-prompt as Administrator and type "bcdedit.exe /set {current} nx OptOut" and reboot.

Go to: Control Panel -- System and Security -- System/

Click /Advanced system settings/

Choose the /Advanced/page and click on /Settings/under /Performance/

Choose the /Data Execution Prevention/page

Add /G6FTPServer.exe/as an exception

If you are experiencing any problem, please Contact us!

The above meaning is If you are using the 2008 system, you need the computer > Attributes > Advanced System Settings -> Advanced > Settings > Data Execution Protection to set g6ftpserver.exe to the column