Vista system two laptops with the same account wireless Internet

Two days have two available books on hand, are Vista system, in view of the Internet account only one state, groping for a long time, finally tried to successfully notebook Internet wireless Internet. Since there is no wireless router and the Vista network settings are different from those of the xp system, the setup steps are briefly recorded. Since it is just the interconnection between the notebooks, there is no need to set up the network. Just set the host host and slave. 1 First open the Network and Sharing Center under Vista, select set up a connection or network in the figure below, then select set up a wireless ad hoc (computer to computer) network 2 and click next, next. . Until the interface of the network name and password appears, the name of the network can be picked up. The security type selects the "WEP" code. The password installation prompt sets the ps: security type which has WPA1-personal and WPA2-personal. Which big cow briefly introduces the above code. The difference is ah ~ 3 is the sharing settings, if you are the host host is a dial-up broadband connection, find the small icon of the broadband link, right-click the property, put the network internet share on the hook. Also remember to open all types of shares in the Network and Sharing Center. The defaults of various types of networks under Vista are closed. Need to be manually turned on (both master slaves). At the same time, if you can't even connect, then shut down the firewall directly. 4 The slave setting is much simpler. First select connect to network in Network and Sharing Center, then select the network you just set, and the next step will prompt you to enter your password. Finally, the link is successful, you can share the Internet~