After WinXP enters the welcome interface, the reason and solution for the white screen appears.

WinXP enters the welcome interface and then there is a white screen. Nothing is going on. What is going on? I believe many users will have a headache when they encounter this situation. I have seen the black screen and blue screen in the system, but the white screen is very rare, and the solution can't be started. In fact, you don't have to worry about it. Your WinXP is normal before entering the welcome interface, and the instructions can still be saved.

1. Hardware reasons.
When you encounter WinXP white screen, you first think of hardware problems. You need to check the hardware, re-plug the memory, and check if there are any bad sectors on the hard disk. If there are bad sectors, you need to take it for repair.
2, system reasons.
You can enter safe mode, move important content to other disks, and directly choose to restore or reinstall the system.
3, the cause of poisoning.
The poisoning is solved, and after entering the safe mode, the whole virus is checked.
4, the reason for the drive.
WinXP white screen may be a problem with your graphics card installation or update an incompatible graphics driver. You can use the driver wizard, or remove the graphics driver in safe mode, and then re-install it in the system.
When the WinXP enters the welcome screen, the white screen is usually caused by the above 4 points. As long as we check one by one and solve it with the corresponding method, this problem is no longer a problem.