Unclear and fierce! Experts easily crack the U disk installation xp system barrier

Using a U disk to install the system is a very good method, very convenient, but when using the U disk to install the system xp system will still encounter some obstacles, the installation process Users often get the error that prompts NTLDR is missing piess any key to restart, which is also a headache. See how the computer masters crack it.
First, put the Windows xp system image to the local disk (non-system disk, such as E disk)
Second, insert the U disk.
Three, open ultraiso, open the mirror of winpe, click start --- write to the hard disk image
four, select the U disk, click to start (before you start to format the U disk before the start)
five, After the burn is complete, click Close to restart the computer (make sure the default boot mode is U disk boot, if not, you can also manually adjust when you restart the computer)
Six, enter the winpe micro system.
Seven, after Winpe startup, you must remember to pull out the U disk, if you do not pull out the U disk directly installed, it will prompt NTLDR missing (I guess it is because of the U disk and our system disk (such as C Disk), are active partitions, if you do not remove the U disk to install the system directly, the file will be copied when the error, so in the beginning, I put the system's image on the local disk) (this is the legend The key step).
Eight, next, the system image, mounted with virtual CD-ROM software (generally in the Winpe system control panel, even if the U disk has been exited, does not affect the use)
Nine, the installation process is not Repeated again.
There is no error in NTLDR is missing press any key to restart after installation.
Installing a system can be said to be a very cautious thing. Which step is wrong, all the operations are abandoned. If you are experiencing similar problems when installing the xp system with a USB flash drive, I hope that the above nine Steps can easily help you solve your troubles.