Drive the extra local connection 2 after reloading? Three steps to easily get

When you set IP and other related information in "Local Area Connection 2", if these parameters are the same as those set in the previous "Local Area Connection", the system will prompt the information occupied by other network cards. At this point, you can manually delete the previous connection information, and convert "local connection 2" into "<local connection", the problem can be solved as follows:
Step1: Enter regedit.exe in the run box, open The Registry Editor, if it is Windows Vista or Windows 7, may require authorization for an administrator account.
Step2: Jump to hkey_local_machine\\SYstem\\CUrrentControlSet\\COntrol\\Network\\, where you can save information about the local connection.
hkey_local_machine\\SYstem\\CurrentControlSet\\Control\\Network\\\\\\Connection is a local connection.
Hkey_local_machine\\SYstem\\CurrentCOntrolSet\\Control\\Network\\\\\\Connection is naturally a local connection 2.
Setp3: Delete the entire subkey value corresponding to local connection 2, delete hkey_local_machine\\ SYstem\\CurrentControlSet\\Control\\Network\\\\{FEF499AF-6AA7-4A0C-9049-8934F5C0322F, considering the stability of the system, it is established to perform the export operation before deleting.
Logout or reboot the system, the extra local connections 2 in the system can be deleted.
Either on the Internet or on the LAN, we need to get the appropriate configuration of the network parameters from the "local connection". However, in the actual web process, we sometimes find that “local connections” may cause various inexplicable failures. For this reason, it is very necessary to learn the contents of this tutorial.