WinXP system boot prompts ntldr is missing how to solve? WinXP system ntldr lost solution

Recently, users of WinXP system reflected that the computer boot prompt "ntldr is missing", causing the computer to boot properly. How to solve this? Ntldr is a system loader whose main function is to parse the boot.ini file and then load the operating system so that it can enter the operating system normally. Therefore, if ntldr is lost, it will cause the boot to fail to enter the operating system. Below, let's take a look at the solution to the loss of ntldr under WinXP.

Method /

1. boot into the CMOS, set the boot from the CD, and then use the PgUp and PgDn key is set to the first startup CD-ROM.

2. CD into the drive system, restart the computer. When displayed to “Press any key to boot from the CD”, press any key to select boot from the disc.

3. When installed into the Windows XP menu, press the & ldquo; R & rdquo; key to enter the recovery stage, which requires that the Administrator account and password input. Type the following.

C:\\Windows》Fixboot Press [Y] to confirm

C:\\Windows》 \\

C:\\"ATTRIB-HNTLDR

C: \\"ATTRIB-SNTLDR

C:\\"ATTRIB-RNTLDR

C:\\"ATTRIB-HNTDETECT.COM

C:\\"ATTRIB-SNTDETECT.COM

C:\\"ATTRIB-RNTDETECT.COM

C:\\"COPYX:\\I386\\NTLDRC: \\Note: X: is the same as the CD-ROM drive code

C: \\ "COPYX: \\ I386 \\ NTDETECT.COM C: \\ after

4. remove the completed disc WinXP type [Exit] and restart the computer, the computer starts to enter the CMOS process, The first startup item is changed back to the hard disk. At the end of the day, the system can enter the system desktop normally!

These are the solutions under WinXP system ntldr missing, the above operation after setting, the computer will not boot prompt & ldquo; ntldr is missing & rdquo ;, the system can be normal start.