If the image file of the primary partition of the hard disk is damaged or lost, or if the primary partition image of the hard disk is not mirrored beforehand, can the system be reinstalled quickly?
condition is to have a ready-made system has done a very good machine, regardless of whether the same hardware configuration, can be a "deceitful" Tim pepper stew hire Kariya Postscript low field br & gt;?
according to the following two Whether the configuration of the machine is the same is discussed in two cases (for the convenience of description, the machine that needs to reinstall the system is called "the machine", and the ready-made machine that the system is well-made is called the "client").
Note: This machine and client hardware configuration and hard disk partition are required.
this case, there are at least four possible methods:
1, the primary partition client's hard disk mirroring, and then copy the image file to the machine, and then by Norton
Ghost
to restore;
2, the client's hard disk is installed to the machine, run Ghost
, select the "Local→Disk→to Disk" item to do the hard disk "clone" ;
3, when in the client side, to link the available parallel cable, the machine starts the entry criteria DOS
mode.
4, the machine runs Norton Ghost
, select "LPT→slave", the client runs Norton Ghost
, select "LPT→master" to carry out two The hard disk between the machines is "clone";
5. If both computers have network cards, start the machine into the DOS
mode of the support network, and complete the machine between the machines through "netbiOS→master". "Clone" operation.
This machine is different from the client hardware configuration and hard disk partition.
First right click on the "My Computer" on the client, select "Properties", select "Hardware Configuration File", click "Copy", give it a new file name, such as BAK.
There are two identical hardware configuration files on the client. When you restart your computer, the system will let you select the hardware configuration file. There are three options:
1.Original configuration
2, BAK
3, None of above
Then, remove the hard disk of the machine, install it on the client, restart the client, select the hardware configuration option on the screen. "1", in the startup process, any error is ignored, enter "My Computer", delete all unnecessary files under the machine C disk, and then copy all the contents of the client C partition one by one to This machine.
After shutdown, remove the hard disk, restart the client, select "1" to enter the system, then open the "Hardware Configuration File" column, delete the BAK file, restart the machine, the client will return to normal. When
last election, the hard disk back onto your own computer, boot the system requirements to select a profile "3" - you will be pleasantly surprised to find blue sky and white clouds appeared on your screen up.
Then the system starts to check the hardware, load the driver, when asked to insert the system installation disk, you can point the path to the "C:\\windows" or "C:\\Windows\\system" directory, when all drivers When the loading is complete, go to the “Hardware Profile Bar” and delete the BAK file. Restart your computer and your machine is fully restored. This is much faster than installing the system directly and installing various drivers and applications.