Five tips for recovering XP administrator passwords

        As we all know, the password of WindowsXP is stored in the SAM file under the WinntSystem32Config where the system is located. The SAM file is the account password database file. When we log in to the system, the system will automatically check with SAM in Config. If you find that the password and user name match the encrypted data in the SAM file, you will log in successfully; if you are wrong, you cannot log in. In this case, our first method is created: delete the SAM file to recover the password.

If you don't care about any account included in the system card, and there are two operating systems, you can use another operating system that can access NTFS to start the computer, or you can use it although there are no two systems installed. Other tools to access NTFS. Then delete the SAM file in the C:WINNTsystem32config directory and restart it. At this time, the administrator Administrator account has no password. Of course, it is a good idea to remove the hard drive and switch to another machine to delete the SAM file.

Tip: Windows NT/2000/XP uses a secure account manager (SAM) mechanism for secure management of user accounts. The security account manager manages accounts by security identity. The security ID is created at the same time when the account is created. Once the account is deleted, the security ID is also deleted. The security identity is unique, and even with the same username, the security identity obtained each time it is created is completely different. Therefore, once an account is deleted, its security identity no longer exists. That is, if the account is rebuilt using the same username, it will be given a different security identity and will not retain the original permissions. Specific performance

security account manager is% SystemRoot% system32configsam file. The SAM file is the user account database of Windows NT/2000/XP, and all the user's login name and password and other related information sections are saved in this file.

Tip 2: Here's a more unusual approach. You can install another XP on other partitions. The hard disk partition format should be the same as the original one, and please be careful not to install the same partition with the original XP! Before starting, be sure to back up the boot area MBR (Master Boot). Record). There are many ways to back up MBR, you can program it yourself, or use tool software, such as anti-virus software KV3000. After loading, log in with the Administrator, now you have absolute write access to the original XP. You can copy the original SAM and use lOphtcrack to get the original password. You can also overwrite all files under the newly installed XP WinntSystem32Config to the CWinntSystem32Config directory (assuming the original XP is installed here), and then use the KV3000 to restore the previously backed up the main boot area MBR. Now you can log in as the Administrator. XP is out.

Tip: MBR commonly known as "master boot", its role is to read the active partition table partition (Partition Table) which set (Active Partition), located on the hard disk cylinder 0, head 0, the position of sector 1, that is, your 0 track position. It is generated by the partition command fdisk. The MBR consists of a hard disk bootloader and a partition table. The MBR end flag is 55AA, which can be viewed with the F6 function of the anti-virus software KV3000. The default screen is MBR. If the MBR cannot find the active partition, it will display an error message like Missing Operating System on the screen, so if your Windows XP does not open properly. And you see an error message like this on the screen, mostly because it is here.

Tip 4: Use Windows Key 5.0. The software is included in PasswareKit5.0, used to restore the system administrator's password. After running, it generates 3 files: txtsetup.oem.winkey.sys and winkey.inf. The three files are only 50KB in total, short and fine. Put these 3 files on any floppy disk, then use the XP installation CD to start the computer. Press F6 during the boot process to let the system install the third-party driver. At this point, it is the best time for us to cut in. Putting the floppy disk will automatically jump to the WindowsKey interface. It will force the Administrator's password to be changed to "12345", so what's the big deal? Hehe! When you restart, you will be asked to change your password again.
Tip 5: Use NTFS DOS, a tool that can write NTFS partitions from DOS. Use this software to make a DOS boot disk, then to C; WinntSystem32 rename the screen saver logon.scr, then copy command.com to C:Winntsystem32 (2000 can use cmd.exe), and rename the file to logon .scr. After waiting for 5 minutes to start the machine, the screen saver that should have appeared now becomes the command line mode, and it has the Administrator permission, through which you can change the password or add a new administrator account. Don't forget to change the name of the screen saver back after the change. Download address: http:/www.cgsecurity.org/index.Html.