After upgrading Win10 official version, the boot speed is slow, and the black screen time is long. How to solve it? In fact, it is important that the function of “Quick Start” provided by the official version of Win10 is incompatible with the computer graphics driver and power management driver. Let's share with you the specific solution for slow startup and long black screen waiting time for Win10 official version.
First of all, you need to explain that the long wait time for the official version of Win10 is usually only in the official version of Win10 that is updated by the “upgrade” method. This type of failure does not occur in the official Win10 system installed in the "new" way. Next, I will share with you the specific solution for the slow startup and long black screen of Win10 official version system:
1. Reasons According to the official statement, the slow boot is caused by the “quick start” function. . This is because the fast-start implementation is based on graphics driver and power management drivers, but there are currently many drivers that are not compatible with the fast-start feature, which results in slower boot speeds.
2, find the reason, it is easy to solve, the method is to close "quick start".
Solution 1:
1. Right-click the “Windows” button in the lower left corner of the desktop and select ““Control Panel” from its right-click menu.
3. From the opened “Control Panel” interface, go to “Hardware and Sound” and click “Change the function of the power button” and click “Change the currently unavailable settings”. ” button.
4. Next, from the bottom of the interface, in the “Shutdown Settings” section, clear the checkbox “Enable Quick Launch (Recommended)” and click the “Save Changes” button to complete the settings.
5, next we need to update the graphics card driver. It is recommended that you use the "Drive Life 6" to update the Windows 10 official driver. In the main interface of the program, switch to the “Local Drive” tab, select the latest graphics driver version number, and click the “Repair Now” button to fix the graphics driver.
Method 2:
1. Fix it by the following method: Right-click the “Windows” button in the lower left corner of the desktop and select “Run” from its right-click menu.
2. From the "Run" window, type "msconfig" and press Enter to enter the "System Configuration Utility" interface.
3. In the "System Configuration" window, switch to the "General" tab, check the "Selective Startup" item, and check the "Load System Service" checkbox. And “load startup items”.
4. Switch to the "Boot" tab and set "Timeout" to "3" and click the "Advanced Options" button.
5. From the "Advanced Options" menu, select "Number of Processors" and set the number of processors to “2”. Finally click “OK”Save.
6. After the above optimization settings, I believe that the boot time of the Win10 official version system will be significantly shortened. As shown in the figure, Xiaobian uses the "360 boot small assistant" to test and test the Win10 official version. The boot time is “19 seconds”.
Additional knowledge: Detailed steps to turn off Quick Launch
1. Right-click on the Win logo in the lower left corner of the screen and click on “Control Panel”. Click <;Hardware & Sound" in the control panel.
2, then click “change the function of the power button”.
3. Click again “Change the currently unavailable settings”.
4. In the shutdown settings, cancel “ enable quick start (recommended) & rdquo;, then click “ save changes & rdquo;.
5. Note that if you have not checked "Allow quick start (recommended)", first check and "Save changes", then uncheck and "Save changes" again. (That is to perform check-check-cancel once).
Note: The above operation is applicable to all Win10 versions.