Win7 computer display CPU Fan Error error prompt solution

win7 computer CPU Fan error error prompt solution

Method 1:

If the CPU fan wiring is wrong, the CPU Fan Error prompt will appear. Open the chassis and check if the CPU fan is connected to the corresponding interface of the motherboard.

Method 2:

After booting, press DEL key to enter BIOS, enter POWER's Hardware Monitor, change CPU FAN SPEED item to IGNORED, CHASSIS FANSPEED item to N/A, POWER Change the FAN SPEED item to IGNORED and see if there is still an error message.

Method 3:

Or because some BIOS settings are wrong, you can solve it by restoring the default state, or directly remove the motherboard battery, wait a moment and then reinstall it, through the motherboard Power failure can also achieve the goal.

Method 4:

The fan speed of the CPU is too low. It may be caused by factors such as fan quality, length of use, and too much dust. You can replace the CPU fan to solve it.

Method 5:

Set Drive A to “None” via BIOS setup to turn off the floppy drive (generally A is the floppy drive).

Method 6:

In addition, many motherboards support a single button to turn off the F1 option. There is a wait for "F1" if error in the BIOS settings.