NetshWLANstarthostednetwork: Enable and start broadcast wireless network managed
NetshWLANshowhostednetwork: display settings managed wireless network, including a list of the user is connected
NetshWLANrefreshhostednetwork: virtual wireless network to a new set of encrypted WPA2-PSK key. You only need to enter this command and you can use your favorite key.
NetshWLANstophostednetwork: disable and stop the broadcast virtual wireless network.
Remember, Windows does not automatically start the virtual wireless network after restart or resume the computer from hibernation. If you need to start a virtual network, you must do it manually.
software developers must also create front-end utility, or using a virtual wireless network characteristics in its application.
order to take full advantage of the virtual wireless network, you can configure the computer to share with the users to connect to the virtual access point their Internet connection (using Windows Internet Connection Sharing attribute).
To enable Internet Connection Sharing, you need to open the Network Connections window, right-click on a connection to the Internet connection, select "Properties." Then, select the Sharing tab, check Allow other network users to connect via this computer's Internet connection, select Virtual Wireless Network Connection from the drop-down list box, and click OK.
display command to set the value of these commands
not allow users to configure, but allow users to see the value of certain settings:
NetshWLANshowcreatealluserprofile: you can know whether the user can Create a wireless profile for all users, not for themselves. .
NetshWLANshowallowexplicitcreds: when a user can not log on to the computer, whether to allow the computer to use 802.1x user credentials are stored.
NetshWLANshowonlyusegpprofilesforallowednetworks: in the implementation of Group Policy, Group Policy is displayed when the wireless configuration file is permitted. The report created a report troubleshooting Wi-Fi issues,:
other commands
NetshWLAN following these commands are not part of what specific uses:
NetshWLANreportissues Located in the C:WindowsTracing folder. Parameter when a user logs in a user is not logged on the computer, specify whether to allow the computer to store credentials for 802.1x authentication, use the following::
NetshWLANsetallowexplicitcreds allow =
NetshWLANsetblockperiod: This command Specifies the number of minutes the client must wait before attempting to connect to the network after an unsuccessful login attempt on the client.
NetshWLANsetprofiletype: definition of the computer's current user or all users are using the wireless network profile. Its configuration parameters are as follows:
name = configuration file name
profiletype =