Win7 64-bit Ultimate Edition makes SSD SSD faster optimization method

As for the introduction of SSDs, compared with the speed of mechanical hard drives, SSD solid-state drives are said to be rocket-like speeds. After installing SSDs, Win7 systems have a qualitative improvement whether they are powered on or running. However, many of my friends may not know that there are some optimization methods that need to be known to use SSDs to make your SSDs perform optimally in Win7 systems.

1. When installing and installing a solid state drive, try to plug it into the SATA 3.0 socket. If you have SATA3.0 on the motherboard, this will make the transfer faster.

2 Partitioning, partitioning can be the same as normal hard disk partitioning, but some remember to check " align to the whole multiple of the following number of sectors ", then select 4096, 4K alignment can make reading and writing faster.

3, using AHCI mode, we directly open the computer's registry editor window, and then expand HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Servicesmsahci in the menu on the left, then modify the disk mode right, the value data Change to 0. After that, remember to restart your computer for the settings to take effect. It should be noted that the AHCI mode must also be enabled in the BIOS.

4, the second way to optimize the SSD is to open the Trim function. Let's open the Start menu, then find the Command Prompt option in all Programs - Accessories, right click to run as administrator, then enter fsutil behavior QUERY DisableDeleteNotify in the Run window and click Enter, so you can query the current Trim function. The state, in general, the system is enabled by default.

5, the third way to optimize the SSD is to turn off the system recovery function. Many friends may not know that the system recovery function will affect the read and write capabilities of the SSD.

6, the fourth way to optimize the SSD is to close the disk index, which can reduce the need for unnecessary read and write to achieve the SSD operation.