The computer can not shut down properly

The computer does not shut down properly. If the configuration or hardware related to system shutdown is damaged, or the system BIOS's advanced power management and advanced configuration settings are incorrect, it may cause the computer to fail to shut down the system. Specific countermeasures If you are unfortunate enough to encounter a failure that cannot be shut down, you can follow the steps below to perform troubleshooting: 1. Hardware devices, compatibility. You know that the Windows 98 operating system has a fast shutdown function, which can effectively reduce the shutdown waiting time. However, this function is easily incompatible with some hardware devices in the computer system, which may cause the system to fail to respond when the computer performs a shutdown operation. Therefore, once you encounter a phenomenon that cannot be shut down, you can restart the computer system, and then click the “Start” and then “Run” command. In the pop-up dialog box, execute the “Msconfig” command. In the configuration window that opens, select the “Advanced” tab and turn off the "Quick Shutdown" function on the tab page. After that, perform the shutdown operation to see if the computer can be shut down normally. If it can be shut down, it means that there is a hardware device incompatibility in the computer. In order to ensure a smooth shutdown in the future, you must set the "Quick Shutdown" function to disabled. 2, the sound file, is normal If you set the exit sound for the shutdown of the Windows system, once the sound file is damaged, the computer will not be able to shut down properly. Therefore, checking whether the sound file of the system is normal is the first work to be checked. When checking, you can click the “Start”/“Settings>;&&quoquo;Control Panel” command, in the pop-up control panel window, double-click the "sound & multimedia" file icon to open later In the settings window, select the "Sounds" tab, and in the tab page shown in Figure 1, select the "Exit Windows" option in the "Sound Event" setting, and then set the "Name" to No, this will cancel the sound when shutting down. Then shut down the computer again, if the computer can be shut down normally after canceling the sound, it means that the current shutdown fault is caused by exiting the sound file. To eliminate this type of failure, you can reinstall the application that provides the sound file, or you can restore it from the backup file. If you can't recover it, you can cancel the shutdown sound directly.