Win7 update vulnerability generated 0x0000006B blue screen solution

win7 update vulnerability generated 0x0000006B blue screen solution. In recent days, many netizens have used the win7 update patch to have a blue screen, the code is 0x0000006b. The blue screen problem occurred when the security update patch launched in April 2016 was installed. After installation, a blue screen appeared. Some netizens said that there is no problem, and some are directly blue. After the blue screen is restarted, the security mode cannot be entered. The last correct configuration is also invalid. Finally, these are all reinstalled once to solve the problem.

The following method is a 0x0000006B blue screen generated for updating the KB3146706 patch.

Method /Steps

Installed the security update patch introduced in April 2016, causing the blue screen to be a win7 system

First, make a pe system. This PE needs to be integrated with dism++. There are many online systems in this area, and no longer introduce them. The computer restarts and chooses to boot from the USB flash drive or boot the CD to enter the PE system.

If you don't have this dism++ you can download it from the Internet and extract it to the Pe system.

A 32-bit system that opens in a command prompt window. Input:

dism /Image:C: /Remove-Package /PackageName:Package_for_KB3146706~31bf3856ad364e35~x86~~6.1.1.2

Press Enter to execute.

64-bit system, prompt window input:

dism /Image:C: /Remove-Package /PackageName:Package_for_KB3146706~31bf3856ad364e35~amd64~~6.1.1.2

Press the Enter key to execute.

The C: of the above command is the system drive letter. If the system is not installed on the C drive, C will be replaced with the actual drive letter. For example, the system is on the D drive, that is, dism /Image:D:

This is the command /. The symbols are all English characters, do not enter the wrong.

After the uninstallation is complete, restart your computer.

If you need to help others or handle more computers, you can change this command to a batch file. You only need to run this file in the PE system when you use it, saving you so long input. The command.

Create a new notebook, one for 32-bit systems. Open Notepad input

dism /Image:C: /Remove-Package /PackageName:Package_for_KB3146706~31bf3856ad364e35~x86~~6.1.1.2

Save the file and change the file name and extension to: WIN7-32 bit.bat

Create a new notepad for 64-bit systems. Open Notepad input

dism /Image:C: /Remove-Package /PackageName:Package_for_KB3146706~31bf3856ad364e35~amd64~~6.1.1.2

Save the file and change the file name and extension to: WIN-64 bit.bat

Then copy the two files to the USB flash drive and use the double-click to open it once.

The blue screen caused this time is mainly the use of a simplified version or a modified version of the GhostWIN7 system. There is basically no problem with the original installation.

After the system is successfully repaired, it is best to turn off the automatic update. If other software needs to be updated, remember to ignore this ‍ KB3146706 patch, do not install.

Precautions

Before entering the command, pay attention to which version is corresponding, and 32 bits correspond to input 32.

The above is the solution for the 0x0000006B blue screen after the win7 update vulnerability. The operation is very simple. Have you learned it? Hope to help everyone!