How to expand c disk space win7 How to expand the C disk space partition assistant

                                                                                                                                                                                         When the hard disk is initially partitioned, it may be considered unreasonable, so that in the later use, a certain partition space may become smaller and smaller, but another partition is still empty. Is there a way to use a partition without using it? The space moved to the partition where the space is almost full?
Partitioning Assistant's "Free Space Allocation" Free space is such a function that visualizes complex operations and is easy to understand, allowing you to expand and shrink partitions with a simple operation. For example, when you have several partitions on your disk and you want to expand the C drive with the free space of one of the partitions, you can do this directly by allocating free space. The specific steps are given below.
Assign free space operation steps
1. Download the free partition assistant, install and run. The disk status is shown in Figure 1. From the main interface, you can see that the E disk has about 302GB, and the C disk has only about 29GB. The following is an example of expanding the C disk by allocating 10 GB of free space from the E disk to the C disk. :

2. Select the E disk, click the right mouse button and select “Allow free space” or select “Free space” on the partition operation on the left side, as shown in Figure 2:

3, in the pop-up window, enter the allocation of unused space 10GB from (E) to: C, which means that 10GB of unused space is allocated from E to C, as shown in Figure 3:

4. After performing the above operations, you can see the pre-execution of your operation on the software interface. The C drive is increased by 10GB, and the E drive is reduced by 10GB. See if you want to achieve it. Go to the toolbar and click the "Submit" button in the pop-up window. Click "Execute" in the pop-up window. During the operation, you may need to restart the computer
, click “yes" to let the program Wait for the operation in the restart mode, as shown in Figure 4:

5, sometimes it is not necessary to restart, but the current to enter There is a program running on the operating partition. Click “& quoquo; Execute” to pop up, as shown in the prompt dialog box shown in Figure 5, prompt to close the program running on this partition, click “retry”, you can close the current Running program, avoid restart:

Note: 1. The partition software is recommended to be installed on the C drive. 2. It may take a while to execute, and the length of time spent depends on the amount of data in the partition. This requires you to wait patiently, please do not force the program to terminate. 3. Before performing operations on each partition, it is best to perform a disk check (chkdsk). If there is an error, fix the error first, and then open the software to perform the operation.