What should I do if the computer boots up to display client mac addr?

Recently, many users are reporting that the client mac addr prompt appears on the screen when the computer is turned on, and then it has been stopped at this interface. It takes a long time to enter the system login interface. What is going on here? In fact, this is because the network card enables the boot function of the BOOT ROM chip, and the network card is caused by the PXE boot chip. Although it does not affect the use of the system, it is slow every time it is turned on. So how to solve this problem? The following small series for everyone to introduce the computer boot client mac addr solution.

steps:

After our client mac addr prompt appears, quickly press the Shift + F10, this time a blue window will pop up.

The first item of the Network Boot Protocol is PXE by default.

The second Boot order is selected as Rom Disable, which means that the NIC prompt is turned off every time the phone is turned on.

The third Show config message is selected as Disable, which means that the <;Shift F10” prompt is turned off.

The fourth Show Message Time defaults to 3S.

After the setting is completed, press F4 to save and exit. Restarting the computer will not cause such a problem.

The above is the solution for the computer to display client mac addr. If you encounter the above situation, you can follow the above steps.