Teach you how to turn into a 25-hour system for a full day speed

. In this fast-paced era, many people often send out “I really hope that there will be more hours per day”. But how can we make the day more than 24 hours? Is it a joke? No, it is still possible! Although we can't change the real time, we can get more effective "utility time”. In fact, you only need to do some simple things, you can use 24 hours to complete 36 hours. Just from the point of view of computer operation, we can make every day & nbsp; extended & rdquo; 1 hour. Note: The following news is not an exact calculation, just a divisor.
Speed ​​up, grab from the BIOS first
After pressing the power switch, the computer first runs the BIOS detection system, although this process is already very fast, but we can make it faster.
1. Remove the floppy drive detection
The newly bought machine basically does not have a floppy drive. It is completely unnecessary to check the BlOS self-test. We can manually set it to none. Here, the Award BIOS is used as an example. For other versions of the BIOS, refer to the manual that came with the motherboard. After booting, press the Del key to enter the BIOS setup interface, select the Standard CMOS Features via the arrow keys and press the Enter key to enter. Also select the Drive A & rdquo; with the arrow keys, and then press the PageDown key continuously to the item. The value is None. Similarly, set the following "Drive B" to None, and set the following Floppy 3 Mode Support to Disabled, press FlO to save and exit.
2. Reduce boot device query
In the BIOS we can set the priority boot device, many people set the first boot device to the CD-ROM drive or floppy drive, but in fact most of the time we boot directly from the hard disk, Therefore, setting the hard disk as the priority boot device can also save a little time: the BIOS setup main interface selects to enter Advanced BIOS Fetures, selects the first boot device, and presses the PageDown key to set the value of this item. Set to “HDD-O” (the first partition of the hard disk), press FlO to save and exit.
3. Speed ​​up self-test
When the BIOS self-test, some hardware detections should be repeated several times. If the Quick Power On Self Test in Advanced BIOS Fetures is set to Enable, you can skip the repeated detection and save time.