First, shorten the startup speed
Select "Run" in the "Start" menu, this time a dialog box will pop up, you can enter the letter MsConfig here, then you can Enter the system configuration utility. In the "General" you can see the boot option, where you choose "Selective Start", then enter the "Start" option, then you can see the stuff that was loaded at the time of startup. Although multi-loading can improve a lot of performance, it can add a lot of features, but it will greatly increase the startup time. Especially for some machines that are not very well-configured, the startup speed is unbearable. If you selectively load the stuff, you will save a lot of time when you start it. If you are configuring a Windows 98 or lower operating system, there is also a file named Autoexec.bat that is also responsible for booting.
Second, the display settings to optimize
show this part of the set is very important, because this part is directly related to good or bad eye. If you can properly optimize the display part, then it will be a good protection for the eyes...
1. Screen protection: The screen protection time is 15 minutes, of course, according to your own specific situation to be;
2, power scheme: wherein "Close monitor" Proposal Thirty minutes is appropriate, and the "off hard disks" select "never" here, since the hard disk turned off, again Startup has a lot of damage to the head;
Sleep 3. In the "Hibernate" option, you can cancel the machine's sleep, which can save 100MB of hard disk space, and also release a part of the memory. In the "Appearance" option, you can choose the "Windows Classic" style, so that although there is no XP gorgeous style, it can greatly speed up the menu.
4, the refresh rate. Under normal circumstances, if you set the refresh rate above 75Hz, the display will not feel flickering, and you will feel very comfortable. The refresh rate is related to the bandwidth of the display. The higher the bandwidth, the higher the refresh rate. In addition, I recommend that you do not use an extra refresh rate, because this is equivalent to overclocking the display, and it is more harmful than overclocking the CPU! As long as your display refresh rate reaches 85Hz, it is enough, instead of deliberately pursuing a higher refresh rate, it will greatly reduce the life of the display.
Third, my computer optimization Raiders
(a), Windows Me system
-click "My Computer" icon and right-click, it will pop up a The menu, you select "Properties" to set.
1, Device Manager. Installing the latest driver can improve the performance of the machine. It is recommended to install a more stable driver. If the motherboard is a VIA chip, select the last VIA BusMaster PCI IDE Controller in the "hard disk controller". "Double IDE channel settings" will appear, here you select "Use two IDE channels", so you will get about 15% faster when you access the hard disk files later. If your CD-ROM drive is not very "antique", open the "DMA" option in the "Optical Drive" option, so that the speed of accessing the CD will be much faster than before.
2, performance. Since file access speed is important to the speed of the computer, virtual memory settings can also affect the speed of the machine. Here, the maximum value of "virtual memory" can be set to about 80% of the available space of the disk, and the minimum value is set to about 100 MB. In addition, you can adjust the "hardware acceleration" to "all advanced graphics settings", so that you can fully utilize the power of the graphics card.
3, the file system → hard disk. This attribute can be used to adjust the purpose of the hard disk to "web server", and the pre-reading optimization is adjusted to all, which can increase the efficiency of the hard disk. It is forbidden to scan the floppy disk during startup, which can also increase the startup speed, and can avoid damage to the head every time it is started. Select the floppy disk page and cancel the "Search for a new floppy disk drive every time you start the computer". "CD-ROM" Here you can adjust the cache to the maximum, and the disc access mode is adjusted to "four times or faster", which can increase the speed of the optical drive. The principle of the cache is to use a part of the memory as a cache of the optical drive, thereby increasing the performance of the optical drive, similar to virtual memory.
4, system restore. System Restore is an important feature that Microsoft has added since the Windows Me operating system. This feature is enabled by default and can be restored by Windows if the files on your computer are corrupted. Windows Me saves the restore information in the _Restore folder. A _Restore folder is created on each hard drive of your computer and will be updated when you restart your computer. Here I think that the actual help of this Dongdong is not very big, but also makes the stupid body so bloated. So I am determined to remove the system and remove the "No System Restore" in the "Troubleshooting". Difference
(two), Windows XP system
Windows XP and Windows Me on the "My Computer" optimal adjustment is not great, here will be different from the presentation with you .
In the system properties, select the "Advanced" option, in the "Performance" settings can be adjusted for some of XP's visual effects, here you can adjust to the best performance or the best appearance according to the configuration of the 俺. If the hardware configuration is very low, it is better to choose the best performance, so that the system can run smoothly; if the hardware configuration is the top configuration, then you should not be polite, open all XP effects, will give you a There has never been a visual enjoyment. In the latter "Advanced Options", both the processor and the memory plan are selected as the optimization priority object, so that the memory and CPU can be prioritized on the program when the program is run, and the program runs much faster.
If you do not have any special needs, please do not "auto-update" function starts. Because some of Microsoft's updates are not necessary, and a lot of time and hard disk space is wasted when downloading those useless stuff. In the "remote" item, it is best not to choose "remote desktop" and "remote assistance". If you choose to leave a back door for the system, it is much easier for those hackers to invade. If strangers know more about me, please ban these two options.
Four, fully optimized network
optimize the network, then that is mainly optimized for IE. Go to IE's "Internet Options" window. In the "General" option, you can set the home page to a blank page, which speeds up the opening of IE. Moreover, you can delete the temporary files of the Internet here, saving a part of the hard disk space, but the price is that the speed of browsing the webpage will be slower, and the size of the appropriate temporary Internet folder can be set according to the free space of the hard disk of the hard disk. Generally, it can be set. It can be around 10MB~30MB. It's a good habit to develop a clear history, because others don't know what websites you've visited and maximize your privacy. It is best to set the date of the history to 0 days, which will automatically delete the history.
Set the security level higher in the security settings, and turn off some dangerous controls, which can greatly reduce the chance of attack. And you can remove some multimedia effects in the "Advanced" settings.
If you are using Windows 98 or previous Caozuojitong, can speed up the network speed by some of the following methods:
1, open the Control Panel, go to "System" in the "Device Manager "" page, select the "Communication Port COM2" property, enter the port settings dialog box, adjust the "Baud Rate B" to the highest, that is, 921600, set the "Flow Control" to hardware, then select "Advanced", will " Receive buffer "to the maximum;
2, open the control panel, select the" modem "in the property, the maximum connection speed is set to the maximum, i.e., 115,200. Enter "Dial-up Network", right-click to select an established connection to enter "Properties", select "Server Type", and only keep the "Enable Software Compression" and "TCP/IP" options in the page;
3, find the system.ini file under the Windows directory, open with Notepad, add "Com?Buffer=1024" under the [386Enh] section, save the disk to exit (where "?" is installed by your Modem The port, such as your Modem installed on Com1, then this sentence should be Com1Buffer = 1024).
five hard questions
1, Defrag. When defragmenting your disk, remember to close all other applications, including screen savers, and set the size of the virtual memory to a fixed value. Do not read or write to the disk. Once the defragmentation program finds that the disk's file has changed, it will start over. And the frequency of defragmenting the disk should be controlled properly, and too frequent finishing will shorten the life of the disk. Generally, disk partitions that are frequently read and written are sorted up to one week at a time.
2, Disk Cleanup. After finishing the hard disk fragmentation, you can also use the "Disk Cleanup" program to clean up some extra files in the hard disk, which can save a part of the hard disk space.
3, ScanDisk. Although its speed is not very good, as long as you have enough patience, after this program complete and detailed scan of the disk, I believe that most of the errors in the system have been fixed.
4, backup. You can use the backup tool that comes with Microsoft to back up the information on the document and the computer, so that even if you have any problems in the future, you can use it to recover, but you need to sacrifice some hard disk space.