Blue screen TOP: 0x000000F4 error analysis and resolution reference (2)

A: The problem is raised:

Hello. My XP will often have a blue screen after a while. The error code is: 0X000000F4 (0X00000003, 0X850D7838, 0X850D79AC, OX805D2140), which is XP under the Apple A1811 dual system. After reinstalling the system, XP can't be installed 360, and a blue screen appears during the patching process. Really confused, trouble you.

Two: Problem Solving Process:

Symptoms
Computers running Microsoft Windows XP or later operating systems stop responding when they resume from standby, and you receive the following KERNEL_DATA_INPAGE_ERROR Stop error message:
0x0000007a (e163a3e4, c000000e, bf8e9313, 0697f860)
or
0x000000F4 (0x00000003, Parameter2, Parameter3, Parameter4)
Note: Parameter2, Parameter3 and Parameter4 in the stop error may have Different.

This issue occurs on a computer that has Windows XP or later installed on a slave that is configured as a slave and that has no other devices connected to the same IDE controller channel (primary or secondary) .
Back to top

Cause
This behavior may occur when using Windows XP or later operating systems with some motherboards. Microsoft is researching this issue and will post more information in this article after getting more information.
Back to top

Solutions
To resolve this issue, use one of the following methods: • For Parallel Advanced Technology Attachment (PATA) drives, configure the disk drive to be used only as the primary drive . For Serial Advanced Technology Attachment (SATA) drives, connect the drive cable to the main channel SATA connector on the system board.
• Connect another device as the primary drive, such as another disk drive, CD drive, or DVD drive.
• Replace the PATA and SATA IDE cables even if it does not look worn.
• Install Windows on your new hard drive because your hard drive or Windows installation may be corrupted.