Windows XP system shutdown and restart failure resolution

  

For the Windows XP system, because it uses the NT core with high security performance, the system runs fairly stable. In addition to the slow shutdown speed, the shutdown problem rarely occurs under normal circumstances. But sometimes it is inexplicably restarted when Windows XP is shut down. This failure may be the most likely to occur in the Windows XP operating system shutdown failure. The cause of this failure may be due to the following reasons:


1. System Settings

Windows XP system automatically restarts when an error occurs in the system by default. So, when the user shuts down, if the system has an error during the shutdown process, the computer will be automatically restarted. If this feature is turned off, there will be no automatic restart failure. The specific method is as follows:

Right click on the desktop “My Computer”, select “Properties> in the pop-up context menu, pop-up "System Properties" window, click “Advanced & rdquo; tab, click the "Start & Fail Recovery" button in the "Settings" button, pop-up "Start and Recovery" window. In the “System Failure” column, remove the checkmark before the “Automatically restart” option, and click the “OK” button.


2. Check USB Devices

Today's various USB devices are very popular, such as: USB flash drive, mouse, keyboard, stereo, mobile hard drive, etc. There are countless. But often these USB devices cause shutdown failures. When your computer shuts down and restarts, if you still have a USB device attached to your computer, immediately unplug it and try again. If you find that the USB device is faulty, then it is best not to connect the device to the computer. If you can't avoid using a USB device, you can connect an external USB hub and connect all USB devices to the USB Hub. Instead of connecting directly to the USB port of the computer motherboard. This problem naturally disappears.


3. Advanced Power Management

It is well known that shutdown is closely related to power management. The cause of shutdown failure is likely to be that power management does not support the system. Caused by it. If this is the case, you can try the following:

Click “Start →Set →Control Panel →Performance & Maintenance→Power Options”, in the pop-up window, enable as needed Or cancel “Advanced Power Support” If you use "Enable Advanced Power Support" in the event of a failure, try to cancel it. Conversely, if the computer is using the cancel "“Advanced Power Support" in the event of a failure, then you try By enabling it, failures are often easily ruled out.

The above three methods are some of the experience summaries of Xiaobian in daily work. When you really encounter a similar situation, it is best to first check the problem and then solve it. If you have any other situation or a good way to solve the problem, welcome everyone to discuss it.

Copyright © Windows knowledge All Rights Reserved