XP operating system abnormal troubleshooting method

  
Windows XP in addition to the interface on the aesthetic and security performance is greatly improved, in many small places considered very thoughtful, considerate and convenient for users. For example, it stores the current state to the hard disk, and then does not need to be initialized by the hardware after booting, and directly reads data from the stored state. Generally, it can be turned on in about 15 seconds, and the startup speed is greatly improved. However, due to the compatibility of hardware and software, when using this function of XP, you may encounter some abnormal situations. The following analysis will give a reference solution: 1. The sound of the onboard sound card is not normal
Many motherboards now come with AC97 sound card. If the onboard sound card in your machine is a soft sound card, then it may be found that the sound is not normal after the second quick start after suspending the hard disk. I have seen the soft sound card attached to an elite SIS735 motherboard. This is not the case. After the Windows XP is quickly booted, the pronunciation is not normal. After the Windows 98 exits to the pure DOS state, and then uses the EXIT command to return to the Windows graphical interface, the sound card is basically Not pronounced. Reference solution: Since this is a hardware problem, there is not much chance of manual adjustment. You can try to replace the latest driver, if not, you have to buy an external sound card or honestly restart the computer. It is worth noting that in XP, the sound card still has a small hoarse sound. It sounds like the speaker is not a sound card problem. Actually, this sound card must be re-initialized by hardware to be reused. . This is the real reason for me to write this abnormal situation, so that everyone can waste time on the speakers, and even "adjust" the speaker. Second, the display is not normal (flower screen or black screen)
Some machines, after a quick boot or wake up from the SLEEP state, may appear flower screen and black screen phenomenon. There are three reasons for this: 1. The display card driver is imperfect: this is the lightest fault. You can find a stable driver version to install. 2. The impact of power supply on the display card: Some inferior power supplies are not enough. The power supply of the AGP display card will be insufficient, and the re-starting of the XP will no longer initialize the hardware. It depends on the ACPI function of the motherboard, so it may have some impact on the power supply. Reference solution: First, make adjustments in BiOS and Windows power options, try not to use fancy functions; second, you can create a text file shortcut, put it on the desktop, plus your own defined shortcuts, In the case of a black screen or a flower screen, press the shortcut key to start the text, the content of the text may be displayed in a part of the screen, and the screen may be switched several times with a mouse click. The display card may be restored due to the refreshed content in the memory. Show, this is a little side-by-side, the rule of the standard is not a cure, but very practical, huh, huh. Third, the mouse can not move after a quick boot This fault is not a crash, the keyboard is still responsive. In fact, after the wake-up in the previous Windows9X, it also appeared. There may be two situations: 1. Your mouse is not compatible with the motherboard or the power supply. 2, your mouse is a counterfeit goods, so when WindowsXP uses the corresponding built-in driver, there is a problem in the identification, causing some bugs. Reference solution: first try to unplug the mouse, then plug it in, use Windows plug and play to detect the mouse again, but this may damage the motherboard interface for a long time; replace other brands of mouse, preferably a genuine mouse; or It is to try to switch the connection of the mouse from the PS/2 interface and the serial port. Some PS/2 interface mice are not suitable for the new functions of XP. By the way, don't underestimate the fake problem of the mouse, thinking that it can be used - when installing windowsXP and Windows2000, often due to the fake mouse caused by the installation failure. Fourth, the activation problem
windows XP joined the activation settings to prevent piracy. Some people install the version to be activated for 30 days. If your motherboard battery is powered off, the boot date is not normal. After the "Welcome" of the quick boot, Windows XP may prompt you to activate before you can use it. Because some people are greedy, they may use the function of suspending the hard disk without saving or transferring some important documents. When the activation prompt is encountered, the activation function locks the system and cannot enter the graphical interface. Loss of work results by processing unfinished documents. Although this is not a real fault of fast boot, it is not very common, it is still necessary to remind everyone, if you do not want to activate the product, then pay attention to your date oh - because the fast boot is also a kind of restart, WindowsXP will detect of.
Copyright © Windows knowledge All Rights Reserved