Download speed

  
                   setting parameter optimization BitComet


a, BitComet provided
: (parameters not described, keep the original set value unchanged)

< B> bitComet main interface


1. run BitComet 0.61, open your BitComet "option" column, click the first column "network connection" (as shown)

< BR>
The global maximum download speed is unlimitedly adjusted to 1000 (users below 2M are an unreachable number, so it is feasible).

Global maximum upload speed limit adjusted to 40 (a reasonable choice based on individual circumstances, this is my proposal number).

listening port is recommended not to repeat 16881-16889 and 6881-6889, personal feeling better between 19770-22000. (Of course you map the port, then the mapped listening port is subject to change, no need to change), the user who installed the firewall opens your listening port in your firewall. Setting method shown below:



2. Click the task settings, the inside of this parameter temporarily remain unchanged in the subsequent adjustment is needed "every task maximum upload them speed "

3. click interface displays the number of look up

changed to peer 1000 (FIG)
4.


click advanced settings If not connected to the number of minutes you add alternate Tracker: 30 30 changed to 0 (FIG)


5 click-Fi


maximum per task. Number of connections: Change to 1000.

Keep the number of connections per task: change to 50.

Global guaranteed upload connection number: change to 10 .

Connection initiation interval: Change to 150 or 100.

Maximum number of TCP connections attempted at the same time: Change to 1000.

Whether to allow intranet interconnection through UDP: The intranet setting "Allow" public network setting "Prohibited". . (FIG)


6 Click IP rules


download task each IP maximum allowed connections: changed to 20

uploads the maximum allowed number of connections per IP: change to the user network 5

to "allow easy connection to the server for reporting subnet IP network" ticked (as shown)

< BR> 7 click the disk cache


256M memory configuration

disk cache minimum:. 6M

maximum disk cache: 30M
< BR> reduced disk cache when free physical memory below: speed adjustment 50M

during the download


top seeds
:

1. After completing the above settings, please download a hot seed (more than 20 seeds, more than 200 user connections), start this download separately.

2. When downloading, you can see that the connection seed and users are increasing, the uploading and downloading speed is slowly increasing, and the speed reaches 1/2 of your normal normal download speed, the number of connections is greater than 50, and the number of seeds is one. In the above (about 5-10 minutes), click "Task Settings" to change the "maximum upload speed per task" to a number between 10-20 and continue downloading.

3. After 2 minutes, if your speed is up, and the undulation is relatively stable, please keep it. If your speed does not rise, you can use the following two methods:

a. Maximize the upload of each task and continue to reduce it at 2K each time;

b. If a does not work Explain that your adjustment time is wrong. Restore the "Maximum upload speed per task" to "Unlimited" and then reduce it. May have little effect

popular seed


popular small seeds tune "every task maximum upload speed" in you if there are results, keep. No effect, do not set "maximum upload speed per task" or set a high point such as 25-30.

Notes
:

1. I want to know if I am looking at my own IP or internal network, 10.xxx, 192.168.xx are all intranets. The basics of not being able to see the remote are also the intranet.

2. If BitComet0.56 extranet users can download a trial is not satisfied BC previous versions or greed abc, Bitspirit and so on.

3. After limiting the uploading of friends to download, strongly urged to cancel the global upload limit for more than 3 hours.

4. When downloading popular seeds, try to download only one file, so that you can enjoy the fast speed of BitComet. Select

5. upload parameters, should be based on their own network, the careful adjustment, if I say that the argument does not suit you, you own more refined, careful fine-tuning.

My adjustment experience
:

After a task starts downloading for a few minutes, put the "Number of connections per task" of the method of point 5 above by "1000" Change to "automatic adjustment", the global maximum download speed will be changed back to "unlimited", you will find that the speed of BT is obviously faster than before adjustment (my now is generally 170-180K, faster than before) 50K !); If the change is not big, then set back and forth between the two methods.
Copyright © Windows knowledge All Rights Reserved