Win7 system to create a wireless router graphic tutorial

First, click the Start menu, enter CMD in the search box, and right click on CMD, click on the menu pop-up "run as administrator", open CMD.

Second step, enter "ldsh; netsh wlan set hostednetwork ssid=computer name mode=allow key=set password in cmd.

Note: This is the reset network login password. The number of passwords is at least 8 digits. Otherwise, the system will prompt that the password setting is unsuccessful.

After the password is complete, press the Enter key.

Next, open “Network and Sharing Center ”, click on the right side of the "Change Adapter Settings". You will find that in addition to the original local connection and wireless network connection, there is one more wireless network connection 2 (because the virtual network card has been created after the setting), it is displayed as “Microsoft Virtual WiFi Miniport Adapter” and The ssid name you set.

Then, right-click "local connection", select "ldquo;" attribute in the right-click menu, in the open interface, switch to the "share" label, check "Allow other networks" The user connects via this computer's Internet connection, and then selects "Wireless Network Connection 2" in the box below (ie, the newly joined network connection) and clicks OK. Of course, if it was originally wireless Internet access, right click on “Wireless Network Connection” to make the same settings in “Properties”.

After the previous settings are completed, the following functions can be activated. Enter the command in cmd: <;netsh wlan Start hostednetwork” and you're done. When you use it, other computers can log in to the computer at the same time by entering the password. Of course, if you want to turn off this feature, there is a way to enter the command line in the CMD interface: "netsh wlan stop hostednetwork”