How to use the CD to repair the system detailed steps

        How to use the CD to repair the system detailed steps: The following describes the commonly used repair methods for several systems: The first installation method: 1, click the "Start" menu, click "Run" 2, enter CMD Enter 3, enter the command SFC/SCANNOW 4. Inserting the system CD system will automatically compare and repair the files in the system disk to the files in the system disk. If not, follow the steps below. First set the CD-ROM boot priority. 1) Restart the computer, press the Del key to enter the BIOS (the notebook presses F2 to enter the BIOS, the settings are similar.) 2) Use the arrow keys to select Advanced BIOS Features 3) Enter to enter the BIOS setup page 4) Select the first Boot Device or (1st) by using the arrow keys. Boot Device) 5) Use the up and down direction keys to select CDROM. 6) Press ESC to return to the BIOS setup screen. 7) Use the arrow keys to select Save & Exit Setup 8) Press the 'Y' key and press Enter. Restart the computer and start the installation steps: 1) After restarting the computer, move the highlight bar to the CDROM with the arrow keys. Insert the XP CD into the CD-ROM drive. 2) When the Press any key to boot from CD appears on the screen, press any key immediately to start the installation interface. 3) First, press Enter to continue the installation, press [R] to enter the Recovery Console or press [F3] to exit. Press Enter instead of [R], otherwise enter the Recovery Console. Next, the screen will appear "Installer is searching for different versions of Windows". After this prompt, you can see if the installer can find the original system on the hard disk. If you find it, select "Repair". The next operation can be performed according to the Chinese prompt.

Second installation method:

1. When using the Windows XP system repair function, restart the computer and put the Windows XP system installation CD into the CD-ROM drive. The screen will display the prompt message “Press any key to Boot from CD" (Press any key to start booting from the disc), press any key such as "Enter". 2. When the "Windows XP Professional Installer, Welcome to the Installer" message is displayed on the screen, press the "Enter" key. It should be noted that the “R” button cannot be pressed here. If the “R” button is pressed, the faulty console repair program for Windows XP will be started. 3. In the “Windows XP Installation Agreement, Windows XP Professional End User Installation Agreement” interface, press “F8” to agree to the license agreement. A message will appear on the screen that says "Windows XP Professional installer, if one of the following Windows XP installations is corrupted, the installer can try to fix it." The Windows XP installer that needs to be fixed is displayed in the list box below the window. If there are more than one, use the up and down arrows to highlight the system that needs to be repaired, and finally press the "R" key. 4. When the screen displays "Windows XP Professional installer, the installer has tried to update the following Windows installation", press the "Enter" key.