What is the meaning of the computer one for two, the computer one for two operation skills (a)

At present, there may be many people do not know what the meaning of the computer one for two, the computer one for two means that one host with two monitors And used alone. If you want to use it alone, it is not impossible. The following small series will teach you how to use the computer. First, we must first confirm that the video card has two video output ports. Now most of the graphics cards are available, and another set of USB keyboard and mouse is prepared. Second, after connecting two monitors, make sure that both of them can output normally. The following is the official setting. 3. After entering the system, right click on the blank space in the desktop - select [Settings], as shown in the figure:

Select [2] in the red box and check the red box option below. After pressing OK, make sure one is displayed normally, one only displays wallpaper, and the mouse can shuttle freely between the two screens. Fourth, in the control panel - add new hardware, install [virtual dog] (hsdog.inf), as shown:

Click Next to install. 5. Select [Yes], then click Next, as shown in the figure:

6. Drag the scroll bar to the bottom, select [Add new hardware device], press Next, as shown in the figure:

7. Select [Install the hardware I manually select from the list], click Next, as shown in the figure:

Eight, select [Show all Equipment], click Next, as shown in the figure:

Nine, select [Install from disk], as shown in the figure:

Ten, click [Browse], as shown in the figure:

XI hishare selected folder in the hsdog.inf, as shown:

twelve, open select OK, as shown:

13. Continue to click [Next], as shown in the figure:

14. Click [Finish], as shown in the figure:

Now install Hishare. 1. Click on the Setup file in the Hishare folder and the following appears:

Click [Next]. Second, select [I agree], click Next, as shown in the figure:

Third, select [Yes], then click Next, as shown in the figure:

Fourth, the dialog box appears, simply click OK to as:

Fifth, a dialog box appears, the first red box below to remove the hook, then hook on, there [Compatible Driver] information, click [OK], as shown in the figure:

6. Open the registration machine, select the file in the lower red box, and then enter [serial number]. Must be a number, continue to enter email and phone, the format must not be wrong, otherwise it can not continue, as shown in the figure:

Click [Next] to continue. 7. Enter the key of the registered machine as shown in the figure:

The serial number can also be entered as the serial number when registering. Eight, click Next, and then User Accounts window will appear, add two administrator accounts, as:

Nine, open the software interface, as shown in the figure:

Ten, select the keyboard and mouse, the default assigned mouse and keyboard will appear, as shown in the figure:

Double-click the first one on the right and select the image as shown below:

Put the following tick on it. Twelve, tick the [when the system starts] tick, enter the user, as shown in the figure:

After the setting is completed, it is basically completed, send an effect picture below to see