Vista under Bt and Thunder download slow solution

Recently, Windows Vista SP1 and Windows XP SP3 news are spreading, I believe many netizens have heard about it. It is not known whether Chen Yongzheng’s resignation has a direct relationship with the lack of promotion of Vista. However, according to the evolution of Windows 2000 to Windows XP, as the machine configuration becomes higher and higher, the market share of Windows Vista will grow very well. And Thunder as our most popular download tool, how can it be better under vista? Is it possible to guarantee the same high speed and security under Windows XP? What kind of skills will you live in under the new system? Mastering this will be of great benefit to our migration to a new operating system platform.

First, let the network card lightly loaded

Windows vista will bundle many protocols on the "local connection" by default, which will bring unnecessary burden to it. In fact, according to the network principle, the fewer protocols bundled on the network card, the easier it is to do “slightly install”, the speed of Thunder download will naturally be much faster.

Open Windows vista & ldquo; control panel & quo; double-click & ldquo; network and sharing center & rdquo; in the open window, click on the left side of the "manage network connection", right-click in the open window “ Local connection & rdquo;, select “ attribute & rdquo;, then cancel the corresponding agreement in the open window (Figure 1). In general, the “QoS Packet Scheduler” and “Internet Protocol Version 6 (TCP/IPv6)” can be cancelled. If you just go to the Internet without accessing a special network, you can also remove the Link Layer Topology Discovery Mapper I/O Driver ” and Link-Layer Topology Discovery Responder. If you are not sharing files on the LAN, you can remove <;Microsoft Network Client" and "File and Printer Sharing for Microsoft Networks". However, in order to access the Internet, now "Internet Protocol Version 4 (TCP/IPv4)" must not be removed.

Figure 1

Second, crack half-open connections

Microsoft released Windows XP SP2 increases the limit TCP connection attempts at the same time and is set to a very small value 10 When the system's TCP connection attempts exceed this value, the system will refuse to connect due to security reasons. This problem also exists in Windows Vista, but currently Thunder has not developed such a crack function (vista is still not very popular). But we can use third-party software to crack, so that Thunder multi-pronged, all the way.

Now download this tool from http://download.softpedia.com/dl/029858726e0e97438cd4de4ecfd32ccf/469cab1c/100072536/software/tweak/vistapatch.zip

. Then extract the files to a temporary folder, and then double-click Patch32.bat (32-bit vista platform) or Patch64.bat (64-bit vista platform) according to your platform, and then press Y to confirm (such as figure 2). When finished, a window like the one shown in Figure 3 will pop up, prompting us to restart Windows Vista. With this tool, you can turn off user account control and crack the number of TCP/IP half-open connections. The maximum value is 70000, which is enough for us to download and use.

Figure 2

Figure 3

Tip

If you are using Windows XP, you select & ldquo Thunder 5; Tools & rdquo; & rarr ; & nbsp; XP system optimization tool & rdquo;, and set the corresponding number of connections in the open window, then click the "Edit connection number" button, set it to a larger value, and then restart the computer.

Third, enjoy the automatic adjustment function of vista

In Windows Vista, Microsoft introduced a new feature called "Auto Tuning" for TCP/IP, theoretically, “ Auto Tuning” can be adjusted and optimized according to network application conditions to increase network transmission rate. But in many cases, it does not work as expected, especially when the network card uses a third-party driver, and even greatly reduces the network connection rate. However, fortunately, we can open it by hand.

First, log in to the system as an administrator, then press Win+R, type cmd to start the command line window, and then type in the command line:

netsh int tcp set global autotuninglevel=normal< Br>

When the operation finishes returning <;OK"; (Figure 4), restart the system.

Figure 4

Fourth, let Thunder hype

In general, install Windows vista machine performance is very good, and some are even rate a 1Gb card. Therefore, with the enhancement of the increase in computing power and network bandwidth, entirely possible for us to let Thunder hype, do not underestimate the resources and waste core vista machine and network resources!

Figure 5

First of all, download the latest version of Thunder 5 from http://www.xunlei.com, because the maximum number of old Thunder 5 tasks is 10. Then start Thunder 5, select “ Tools & rdquo; & rarquo; & ldquo; configuration & rdquo;, then select & ldquo; connection & rdquo;, you can set the number of tasks at the same time on the right side, up to 20 ( As shown in Figure 5). In general, we can set it to 10-15, and the machine with Windows Vista installed will not have problems.

V. Don't use the modified version of Thunder

Now there are some modified versions of Thunder, many users will download and use. In fact, the current speed is very fast, and a little advertisement is nothing at all. More serious is that the crack version of Thunder has cracked some download restrictions, which is very likely to cause the system's network files to be cracked or Thunder itself files to be cracked, which will cause Thunder itself to make frequent mistakes, causing some resources. Unable to download, or some resources to half of the Thunder caused the Thunder to quit without any reason, after restarting, can no longer find the previously downloaded resources.

Windows Vista has just been released in less than a year, and there are a lot of bugs and bugs to fix, and these are often used by the modified version of Thunder, but by modifying your operating system files. System vulnerabilities, open more ports, or consume a lot of network and system resources, which can cause system hacking, data theft, or system crash.

Sixth, let BT download high speed under vista

Download BT under vista, is it not fast enough? In fact, as long as we use the latest version of Thunder, and open the corresponding service in vista, it can support UPnP automatic mapping technology, greatly enhancing its download speed.

Right-click on "Computer" and select "Manage", then click on "Services & Applications" under "Services & Applications" and double-click on SSDP Discovery in “ On the General tab, click the “Startup Type drop-down list box and select “Auto", click the “OK" button to confirm. If this service was previously closed, you can click the “Start” button to start the service (Figure 6). This way, you can discover network devices and services that use the SSDP discovery protocol, such as UPnP devices.

Figure 6

Since then, we can see in the lower left corner of the Thunder 5 & ldquo; network & rdquo; entry icon is already green, you can click to see UPnP has normal (Figure 7 ).

Figure 7
Tip

★ With this technology, and broadband users without the need for external public network peers can achieve interoperability within the local area network, more penetration, more connections More, the download speed will naturally be faster.

★ Real UPnP technology requires router or gateway device support, but most routers and gateway devices support it, and support for UPnP is also a trend, so you can rest assured.

Tips

Why download speeds get faster after turning on UPnp

Most enterprise LAN users and users using broadband routers often complain about speed when using BT downloads. slow. The reason for this phenomenon is that LAN users and users using broadband routers use the NAT conversion method to internal network (that is, internal addresses, these addresses are not routable, and cannot directly exchange data with the outside). IP is converted to external. Routing IP Internet access. It can't accept the active connection of the external BT client, so the peers will naturally be much less. Not only can't get data from these peers, and we can't upload data to them. According to the spirit of BT, the less we upload, the slower it will be!

To solve this problem, the general approach is to do port mapping on the router, but this is very troublesome. Except for the network management, it is very difficult for ordinary people to complete. However, the new version of Thunder has now supported the UPnP port to map the port that the Thunder is listening from the gateway or router to the intranet computer. In this way, users in LAN users and routers can actively connect to more external peers, and can also be connected by more peers. With more peers, the speed will naturally be faster.

After this operation, is your Thunder running more smoothly in the new system?